CakeFest 2024: The Official CakePHP Conference

fscanf

(PHP 4 >= 4.0.1, PHP 5, PHP 7, PHP 8)

fscanfBir dosyadaki girdiyi belli bir biçeme göre çözümler

Açıklama

fscanf(resource $dt, string $biçem, mixed &...$değerler): array|int|false|null

fscanf() işlevi, girdisini dt ile ilişkili bir dosyadan alması ve bu girdiyi belirtilen biçem'e göre yorumlaması dışında sscanf() işlevine benzer.

Biçem dizgesindeki boşluk karakterleri girdi akımındaki boşluk karakterleri ile eşleşir. Yani, biçem dizgesindeki bir sekme karakteri (\t) girdi dizgesindeki tek bir boşluk karakteri (" ") ile eşleşebilir.

Her fscanf() çağrısı dosyadan tek bir satır okur.

Bağımsız Değişkenler

dt

Bir dosya tanıtıcısı. Genellikle fopen() kullanılarak oluşturulur.

biçem

Girdi dizgesinin yorumlanmasında kullanılan bu dizge ile ilgili ayrıntılar aşağıdaki farklar dışında sprintf() işlevinin belgesinde açıklanmıştır:

  • İşlev yerele duyarlı değildir.
  • F, g, G and b desteklenmez.
  • D ondalık sayı anlamına gelir.
  • i taban algılamalı tamsayı anlamına gelir.
  • n şimdiye kadar işlenen karakter sayısı anlamına gelir.
  • s herhangi bir boşluk karakterinde okumayı durdurur.
  • dğşnum$ yerine * bu dönüştürme belirtiminin atamasını baskılar.

değerler

İsteğe bağlı atanmış değerler.

Dönen Değerler

Bu işleve sadece iki bağımsız değişken aktarılırsa çözümlenen değerler bir dizi olarak döndürülür. Aksi takdirde, eğer isteğe bağlı bağımsız değişkenler aktarılırsa işlev atanan değerlerin sayısı ile döner. İsteğe bağlı değerler gönderimli aktarılmalıdır.

biçem dizgesi içinde gerekenden daha fazla alt dizge mevcutsa işlev null döner. Diğer hata durumlarında false döner.

Örnekler

Örnek 1 - fscanf() örneği

<?php
$dt
= fopen("kişiler.txt", "r");
while (
$kişiselveri = fscanf($dt, "%s\t%s\t%s\n")) {
list (
$isim, $meslek, $ülkekodu) = $kişiselveri;
//... değerlerle yapılan işlemler
}
fclose($dt);
?>

Örnek 2 - kişiler.txt içeriği

avni      avanak        tr
varyemez  işadamı       us
tenten    gezgin        fr
zagor     kahraman      ca

Ayrıca Bakınız

  • fread() - Dosyayı ikil kipte okur
  • fgets() - Dosya tanıtıcısından bir satır döndürür
  • fgetss() - Dosya tanıtıcısından bir satırı HTML etiketlerinden arındırarak döndürür
  • sscanf() - Girdi dizgesini belli bir biçeme göre yorumlar
  • printf() - Biçemli bir dizge çıktılar
  • sprintf() - Biçemli bir dizge döndürür

add a note

User Contributed Notes 10 notes

up
18
yasuo_ohgaki at hotmail dot com
23 years ago
For C/C++ programmers.

fscanf() does not work like C/C++, because PHP's fscanf() move file pointer the next line implicitly.
up
7
Bertrand dot Lecun at prism dot uvsq dot Fr
16 years ago
It would be great to precise in the fscanf documentation
that one call to the function, reads a complete line.
and not just the number of values defined in the format.

If a text file contains 2 lines each containing 4 integer values,
reading the file with 8 fscanf($fd,"%d",$v) doesnt run !
You have to make 2
fscanf($fd,"%d %d %d %d",$v1,$v2,$v3,$v4);

Then 1 fscanf per line.
up
2
eugene at pro-access dot com
22 years ago
If you want to read text files in csv format or the like(no matter what character the fields are separated with), you should use fgetcsv() instead. When a text for a field is blank, fscanf() may skip it and fill it with the next text, whereas fgetcsv() correctly regards it as a blank field.
up
1
worldwideroach at hotmail dot com
18 years ago
Yet another function to read a file and return a record/string by a delimiter. It is very much like fgets() with the delimiter being an additional parameter. Works great across multiple lines.

function fgetd(&$rFile, $sDelim, $iBuffer=1024) {
$sRecord = '';
while(!feof($rFile)) {
$iPos = strpos($sRecord, $sDelim);
if ($iPos === false) {
$sRecord .= fread($rFile, $iBuffer);
} else {
fseek($rFile, 0-strlen($sRecord)+$iPos+strlen($sDelim), SEEK_CUR);
return substr($sRecord, 0, $iPos);
}
}
return false;
}
up
-1
nico at nicoswd dot com
10 years ago
If you want to parse a cron file, you may use this pattern:

<?php

while ($cron = fscanf($fp, "%s %s %s %s %s %[^\n]s"))
{

}

?>
up
-2
loco.xxx at gmail dot com
17 years ago
to include all type of visible chars you should try:

<?php fscanf($file_handler,"%[ -~]"); ?>
up
-3
robert at NOSPAM dot NOSPAM
21 years ago
actually, instead of trying to think of every character that might be in your file, excluding the delimiter would be much easier.

for example, if your delimiter was a comma use:

%[^,]

instead of:

%[a-zA-Z0-9.| ... ]

Just make sure to use %[^,\n] on your last entry so you don't include the newline.
up
-8
arentzen at religion dot dk
16 years ago
If you want fscanf()to scan one variable in a large number of lines, e.g an Ipadress in a line with more variables, then use fscanf with explode()
<?
$filename = "somefile.txt";
$fp = fopen($filename, "r") or die ("Error opening file! \n");
$u = explode(" ",$line); // $u is the variable eg. an IPadress
while ($line = fscanf($fp,"%s",$u)) {
if(preg_match("/^$u/",$_SERVER['REMOTE_ADDR'])) {$badipadresss++;} // do something and continue scan
}
?>
Besides, fscanf()is much faster than fgets()
up
-6
james at zephyr-works dot com
22 years ago
fscanf works a little retardedly I've found. Instead of using just a plain %s you probably will need to use sets instead. Because it works so screwy compared to C/C++, fscanf does not have the ability to scan ahead in a string and pattern match correctly, so a seemingly perfect function call like:

fscanf($fh, "%s::%s");

With a file like:

user::password

Will not work. When fscanf looks for a string, it will look and stop at nothing except for a whitespace so :: and everything except whitespace is considered part of that string, however you can make it a little smarter by:

fscanf($fh, "%[a-zA-Z0-9,. ]::%[a-zA-Z0-9,. ]" $var1, $var2);

Which tells it that it can only accept a through z A through Z 0 through 9 a comma a period and a whitespace as input to the string, everything else cause it to stop taking in as input and continue parsing the line. This is very useful if you want to get a sentence into the string and you're not sure of exactly how many words to add, etc.
up
-24
hdh265 at 163 dot com
8 years ago
The use of PHP code in the ACM submission
Here is a sample solution for problem 1001 using PHP:
<?php
while (fscanf(STDIN, "%d%d", $a, $b) == 2) {
print (
$a + $b) . "\n";
}
To Top